manualshive.com logo in svg

Siemens FDSB221, Technical Manual, Page: 26 / 42

Share
Download
Siemens FDSB221 Technical Manual Download Page 26

Mounting / Installation 

5 

Configuration 

26 
Building Technologies 

 

A6V10320090_c_en_--

Fire Safety 

 

02.11.2011

Installation 

 

For better visibility, the designation plate should be fitted on the interbase. 

 

  The detector base is fitted and installed. 

  The detector base is in a location that allows for the beam angle in the 

FDSB229. 

  The previously fitted point detector has been removed from the detector base. 

1.  Install the required accessories: FDBZ293, FDB291. 
2.  Place the interbase on the detector base and turn it clockwise until it snaps into 

place. 

3.  Place either the cover plate FDBZ296 or the point detector on the interbase 

and turn it clockwise until it snaps into place. 

  The interbase is connected to the detector base and ready for use. 

 

Removing the interbase 

1.  Remove the point detector. 
2.  Release the interbase's detector locking device. 
3.  Unscrew the interbase from the detector base by turning counter-clockwise. 
 

Summary of Contents for FDSB221











































Reviews:

No comments