manualshive.com logo in svg

Siemens FDSB221, Technical Manual, Page: 16 / 42

Share
Download
Siemens FDSB221 Technical Manual Download Page 16

Structure and function 

3 

Function 

16 
Building Technologies 

 

A6V10320090_c_en_--

Fire Safety 

 

02.11.2011

3.5

 

Function 

3.5.1

 

Configuration 

The configuration influences the behavior of the devices so it can be specifically 

adjusted to the anticipated conditions in the monitored environment. 
All settings are programmed in the devices. During commissioning, the optimum 

setting must be selected for the conditions at the place of installation.  
You can configure the settings as follows: 

  Using the 'SintesoWorks' software 

  Directly on your fire detection system 

A description of the exact configuration procedure can be found in the relevant 

documentation.  

 

Observe the 'Applicable documents' section in the 'About this document' chapter. 

 

3.5.2

 

Escalation levels and sound levels 

Sounder interbase FDSB221 

The sounder interbase FDSB221 can be activated for the following selectable 

escalation levels:  

  Warning (Alert) 

  Evacuation (EVAC) 

The tone can be configured individually for the two selectable escalation levels and 

the sound level can be configured by interbase. Different tones are available, each 

with three sound levels. One alarm sound level according to EN 54-3 and two test 

sound levels. 

Sounder beacon interbase FDSB229 

The sounder beacon interbase FDSB229 can be activated for the following 

selectable escalation levels: 

  Warning (Alert) 

  Evacuation (EVAC) 

The tone can be configured individually for the two selectable escalation levels and 

the sound level can be configured by device. Different tones are available, each 

with three sound levels. One alarm sound level according to EN 54-3 and two test 

sound levels. 

Summary of Contents for FDSB221











































Reviews:

No comments