en
Operating the appliance
16
Selecting a hotplate and heat setting
The hob must be switched on.
1.
Touch the
"
and
Ä
symbols for the required
hotplate.
The
‹
indicator gets brighter.
2.
Swipe your finger over the relative settings area until
the required heat setting lights up.
The heat setting is set.
Changing the power level
Select the hotplate and set the desired power level in
the programming zone.
Switch off the hotplate
Select the hotplate and set it to
‹
in the programming
panel. The hotplate turns off and the residual heat
indicator appears.
Notes
■
If no pan has been placed on the hotplate, the
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
■
If a pan has been placed on the hotplate before
switching on the hob, it will be detected within
20 seconds of pressing the main switch and the
hotplate will be selected automatically. Once
detected, select the power level within the next
20 seconds or the hotplate will switch off.
Switching the ventilation system on and off
Note:
Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Note:
If no metal grease filter is available, the ventilation
system cannot be switched on. Insert the metal grease
filter. The hob functions are also available if there is no
metal grease filter.
~
"Cleaning" on page 41
Note:
Do not obstruct the ventilation openings. Do not
place objects on the filter cover, as this will reduce the
power of the ventilation system.
Note:
When you switch on the ventilation system, the
right-hand settings area is no longer available. You can
change the fan setting for the ventilation system in the
left-hand settings area.
Switching on the ventilation system
Note:
If the
I
and
o
symbols are not available, insert
the metal grease filter correctly.
The
I
and
o
symbols are available. The ventilation
system can be switched on.
1.
Touch the
I
symbol.
The ventilation system starts at fan setting
ƒ
. The
setting that is selected will be shown on the display
panel and in the left-hand settings area. The right-
hand settings area is not available.
Notes
– Heat settings cannot be changed while the
ventilation system setting is being applied.
– During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
settings area can then be used for selecting the
heat settings again.
2.
Select the required setting from the settings area.
The setting that is selected will be displayed in the
left-hand settings area.
Selecting the fan setting
1.
Touch the
I
symbol.
The ventilation system starts at fan setting
ƒ
. The
setting that is selected will be displayed in the left-
hand settings area. The right-hand settings area is
not available.
2.
Select the required setting from the left-hand settings
area.
The setting that is selected will be displayed in the
left-hand settings area.
Switching off the ventilation system
If you want to switch off the appliance, touch the
#
symbol. If you only want to switch off the ventilation
system, proceed as follows:
1.
Touch the
I
symbol.
2.
Select the
‹
symbol in the settings area.
3.
Touch the
I
symbol to switch to the setting area for
the hob.
Note:
The run-on will start once the appliance has been
switched off (depending on the basic settings selected).
¢
¢
