en
Before using for the first time
14
K
Before using for the first
time
Before us
ing for t
he first
time
Please read the following information before using the
appliance for the first time:
Clean the appliance and all accessory parts thoroughly.
Before you can use your new appliance, you must apply
certain settings.
Initial use
Note:
When it is delivered, the appliance is preset to air
recirculation mode.
Possible settings:
■
In air recirculation mode, if
’‚ˆ
is displayed, the
value
‹
(factory setting) is set.
■
In air extraction mode, if
’‚ˆ
is displayed, the value
‚
is set.
Switching over the display for exhaust air mode
For air extraction mode, the electronic controller's
display must be switched accordingly to the basic
settings.
1.
Check whether the appliance is connected and
switched off.
2.
Switch on the appliance.
3.
Within ten seconds, touch and hold the
0
symbol
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
4.
Touching the
0
symbol again takes you to the basic
settings.
™‚
and
‹
light up as a presetting in the displays.
5.
Touch the
0
symbol repeatedly until
™‚ˆ
is
displayed.
6.
Select the setting
‚
in the control panel.
7.
Touch the
0
symbol for at least 4 seconds.
This will save the settings.
8.
Use the main switch in order to exit the basic
settings.
The display of the electronic controller is switched to air
extraction mode.
Switching over the display for circulating-air mode
When it is delivered, the appliance is set to air
recirculation mode.
If the settings have been changed, proceed as follows
to set the display for the electronic controller in the
basic settings for air recirculation mode.
1.
Check whether the appliance is connected and
switched off.
2.
Switch on the appliance.
3.
Within ten seconds, touch and hold the
0
symbol
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
4.
Touching the
0
symbol again takes you to the basic
settings.
™‚
and
‹
light up as a presetting in the displays.
5.
Touch the
0
symbol repeatedly until
™‚ˆ
is
displayed.
Product information
Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
‹
.
†
Product information
Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
‹
.
†
