manualshive.com logo in svg

Siemens DESIGO PXM20, User Manual

Share
Download
Siemens DESIGO PXM20 User Manual Download Page 67

67/70 

Siemens 

PXM20 / PXM20-E operator unit 

CM110754en_02 

Building Technologies

            Index                                                                                                          1

7 Dec 2009 

Set date & time ................................................................................18 
Setting a setpoint .............................................................................31 
Setting values 

Heating curve .............................................................................32 

Settings............................................................................................17 

Daylight savings .........................................................................18 
PXM20........................................................................................19 
System........................................................................................18 

START .............................................................................................26 
Symbols 

Acknowledged ............................................................................39 
Acknowledged alarm ..................................................................16 
Add new users............................................................................15 
Alarm acknowledged ..................................................................35 
Alarm Acknowledged..................................................................16 
Alarm fault state..........................................................................16 
Alarm Normal..............................................................................35 
Alarm Normal state.....................................................................16 
Alarm Off Normal........................................................................16 
Alarm reset .................................................................................16 
Alarming & functions...................................................................14 
Calendar / Calendar entry ..........................................................14 
Change password.......................................................................15 
Command control .......................................................................14 
Daylight savings .........................................................................15 
Debug information ......................................................................15 
Delete user .................................................................................15 
Device.........................................................................................15 
Edit user .....................................................................................15 
Event acknowledged ..................................................................16 
Event reset .................................................................................16 
Extended alarm ..........................................................................35 
Favorites.....................................................................................14 
Forced control.............................................................................33 
Global objects.............................................................................15 
Hierarchical element...................................................................14 
Information..................................................................................14 
Input............................................................................................14 
Interface variable ........................................................................14 
Log-out .......................................................................................14 
Navigate .....................................................................................14 
Output.........................................................................................14 
Override......................................................................................16 
Parameters .................................................................................14 
Power control..............................................................................14 
Reset ..........................................................................................39 

Summary of Contents for DESIGO PXM20







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands