manualshive.com logo in svg

Siemens DESIGO PXM20, User Manual

Share
Download
Siemens DESIGO PXM20 User Manual Download Page 44

44/70 

Siemens 

PXM20 / PXM20-E operator unit 

CM110754en_02 

Building Technologies 

Setting time schedules 

17 Dec 2009 

9.1.1 

Editing the switching points 

 

The exact time and the state which comprise the entry are shown on 
the next line, and can be selected for editing. Confirm your entry by 
pressing 

OK

.   

1. 

To change the schedule for this day, select 

CHANGE 

PROGRAM

.    

 

 

 
2. 

Move from one entry to the next within the 24-hour 
schedule. The selected entry is marked by a small black 
arrow above the 24-hour schedule.   

 

9.1.1.1 

Editing an existing entry 

 

Edit existing entries in the normal way, using the associated direct 
access keys (the procedure is described in Section 6). 

9.1.1.2 

Copy 24-hour profile 

 

To copy a 24-hour profile to other days, navigate to the day which is 
to be used as a template.  

Then go to the line 

Day copy to 

and select the days to which you 

want to copy the profile; acknowledge with OK for each day.  

9.1.1.3 

New entry 

 

To add an entry select 

NEW ENTRY 

and edit the new entry. 

9.1.1.4 

Delete entry 

 

To delete an entry, first select the entry to be deleted, and then 
select 

DELETE ENTRY.

  

 

 

Summary of Contents for DESIGO PXM20







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands