manualshive.com logo in svg

Siemens DESIGO PXM20, User Manual

Share
Download
Siemens DESIGO PXM20 User Manual Download Page 43

43/70 

Siemens 

PXM20 / PXM20-E operator unit 

CM110754en_02 

Building Technologies 

Setting time schedules 

17 Dec 2009 

9 

Setting time schedules 

 

The Scheduler consists of a 7-day schedule and an exception 
schedule. You can use the scheduler to program the following:  

  Time-dependent on/off switch control 

and/or 

 Time-dependent setpoint adjustment 

In the 7-day schedule, you can define daily profiles to be repeated 
week after week. In the exception schedule, you define days which 
deviate from those defined in the 7-day schedule.  

The names and locations of these time schedules are defined on a 
plant-specific basis. The following illustrations are examples only. 

9.1 

Scheduler 

 

It is possible to define a particular profile for each day of the week 
within the 7-day schedule .  

1.  Navigate to the required scheduler.  
2.  Use the direct access key to select the required day of the 

week. 

 

 

 

The selected day is marked with a rectangle (Monday in the example 
above). A graphics-based display of the selected day appears on the 
second line. You can select the individual switching points with the 
associated direct access key. The next line displays the values for 
the selected switching point. 

 

Summary of Contents for DESIGO PXM20







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands