Siemens DESIGO PXM20 User Manual Download Page 56

Page: 56 / 70

56/70

Siemens

PXM20 / PXM20-E operator unit

CM110754en_02

Building Technologies

Trend function and settings

17 Dec 2009

10.3.3 Graphic view online

The

Graphic view online

displays the required value dynamically,

i.e. in real time.

Note

To view all the values so far stored in the PXM20, select

Graphic

view

(Section 10.3.2).

Here, you can define the duration ("Record time"), and the high and
low range limits for the value.

Figure 10-8 Settings in the Graphic view.

Under

Record time

you can define the period of time for which you

want to display this dynamic trend.

Low limit

and

High limit

represent the upper and lower limits for the

value range to be displayed.

The trend is displayed soon as you confirm your entries via

GRAPHIC.

You can reset the graphic display by pressing

OK.

Figure 10-9 Online trend

Summary of Contents for DESIGO PXM20







































































Search results

Summary of Contents for DESIGO PXM20

Reviews:

Brands by name

Popular brands

Siemens DESIGO PXM20, User Manual

Search results

Summary of Contents for DESIGO PXM20

Reviews:

Brands by name

Popular brands