en
Trouble shooting
38
--------
Maximum operating time exceeded
Your appliance automatically ends the operation if no
duration has been set and the setting has not been
changed for a long time.
The point at which this occurs depends on the
temperature or grill setting that has been set.
A message appears on the display on the appliance to
say that the operation is being ended automatically. The
operation is then cancelled.
To use the appliance again, first switch it off. To switch
the appliance back on again set the required operation.
Tip:
Set a cooking time so that the appliance does not
switch off when you do not want it to, e.g. with an
extremely long preparation time. The appliance heats
up until the set cooking time has elapsed.
Cooking compartment bulbs
To light the interior of your cooking compartment, your
appliance has one or more long-life LED bulbs.
However, if ever an LED bulb or the bulb's glass cover
is defective, call the after-sales service. The lamp cover
must not be removed.
Panel does not open
X
Power cut
Check whether other kitchen appliances are working
The circuit breaker is faulty
Check in the fuse box to make sure that the fuse for
the appliance is in working order
Faulty sensor
Call the after-sales service
If required, empty the water tank: Open the appliance
door, take hold of the lower part of the panel on the
left and right with your fingers and pull out the panel
Home Connect does not work cor-
rectly.
Go to www.home-connect.com
The cooking compartment becomes
hot during microwave-only operation.
Drying function is switched on.
To prevent condensation forming when the appliance
is in microwave-only mode, the appliance will auto-
matically switch on the top heating element when it is
set to 600 W or "Max.". The cooking result is not
affected by this.
You can switch this function off in the basic settings.
Observe the information on the microwave.