Operating the appliance
en
17
Setting the water hardness
The default water hardness setting is "very hard".
Change this setting if your water is softer. You can ask
your water supplier about the water hardness level.
1.
Set the hardness using the rotary selector.
2.
Touch the
Æ
arrow.
A message appears on the display confirming that
the initial use has been completed.
With HomeConnect
1.
Touch "Set using the assistant".
2.
Further instructions can be found in section
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
1.
Remove the accessories from the cooking
compartment.
2.
Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3.
Before heating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
4.
Press the on/off button to switch on the appliance.
5.
Fill the water tank.
6.
Set the specified type of heating, temperature and
steam injection, then start the appliance.
7.
Keep the kitchen ventilated while the appliance is
heating.
8.
Use the on/off button to switch off the appliance
once the specified time has elapsed.
9.
Wait for the cooking compartment to cool down.
10.
Clean the smooth surfaces with soapy water and a
dish cloth.
11.
Empty the water tank and dry the cooking
compartment.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching on the appliance
Use the on/off button to switch the appliance on.
The on/off symbol above the button lights up in blue.
The studioLine logo appears in the display, followed by
a type of heating and a temperature.
Note:
In the basic settings, you can specify which
operating mode should appear after the appliance is
switched on.
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
Note:
You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to resume operation.
Tip:
You can change this setting in the basic settings.
Settings
Type of heating
4D hot air
:
with added steam ("high")
Temperature
Maximum
Cooking time
1 hour
