SIEMENS
CF62 Level 2 Service Manual
Copyright © Siemens Mobile
SSMC MD CCQ
All rights reserved
27 of 42
Internal Service Use Only
Siemenes Shanghai Technical Support Center
7
Mobile Software Programming
7.1 Introduction
The common mobile software available is divided into language groups. However, this
software does not contain the specific settings, such as ringing tones, greeting text, short
dial list etc., required by the operator(s) or service provider(s). Therefore, it is not
uncommon to have some menu item(s) differ in different variants or are not visible at all.
These settings are stored in different memory area of the mobile and will be activated
depending on the customer specific model or variant of the phone by a separate test step
during the production process.
Due to this separation of common mobile software and customer specific initialization, it
is possible to fulfill the demands of the market requiring customization and flexibility. As
a consequence the software programming process in the LSO is divided into two different
steps as followed:
- Software update to actual version and appropriate language group
- Programming of customer specific initialization. Include mapping and FFS.
FIGURE 7.1 CF62 SERIES SOFTWARE PROGRAMMING SETUP
