Install the camera
25
Siemens Building Technologies
Fire Safety & Security Products
08.2006
6.2.5.1 CAMERA ID
Select the CAMERA ID position, press ENTER
into modify mode as shown in the figure.
Right button choose position and use
UP/DOWN button choose text (0 - 9, A - Z) the
max 24 characters.
6.2.5.2 ALARM
Enter ALARM submenu as shown in the figure.
Using UP/DOWN Key to adjust cursor to the
function which wants to modify.
Press ENTER key to enter Modify status and
then using UP/DOWN key to select Mode after
selected and then press Enter key to leave
modify status.
6.2.5.3 ALARM TEXT
Select the ALARM TEXT position, press ENTER
into modify mode as shown in the figure. Using
Left/Right button choose position and use
UP/DOWN button choose text (0 - 9, A - Z) the
max 24 characters.
6.2.5.4 ALARM ACTION
Use the UP/DOWN button to select OFF, OUT,
B/W, ALL (OUT & B/W) as shown in the figure.
6.2.5.5 ALARM DELAY
Use the UP/DOWN button to select 0, 5, 10, 15,
20 sec. For delay of ALARM operate timing as
shown in the figure. Alarm will be reset auto-
matically after selected time.
OTHER SETUP
CAMERA ID
-----------------------------
<ALARM>
<MOTION>
BACK
ALARM TEXT
----------------------------------
ALARM ACTION OUT
ALARM DELAY 0
BACK
ALARM TEXT
----------------------------------
ALARM ACTION OUT
ALARM DELAY 0
BACK
ALARM TEXT
----------------------------------
ALARM ACTION OUT
ALARM DELAY 0
BACK
OTHER SETUP
CAMERA ID
-----------------------------
<ALARM>
<MOTION>
BACK