Install the camera
24
Siemens Building Technologies
Fire Safety & Security Products
08.2006
6.2.4.6 COLOR BAR
6.2.4.7 DNR
This function is for digital noise reduce. Move
the cursor to the position as shown in the figure.
Press Enter and use UP/DOWN button to
choose ON or OFF.
6.2.4.8 BACKFOCUS
This function is for perform back focus adjust. It
will force the iris of the AI lens to open fully and
set to ELC mode for easy back focus adjust-
ment. Move the cursor to the position as shown
in the figure.
Press Enter and use UP/DOWN button to
choose ON or OFF.
6.2.4.9 SYSTEM
Move the cursor to the position as shown in the
figure.
Press Enter Key and use UP/DOWN button to
choose NTSC or PAL system.
6.2.5 OTHER
SETUP
Enter OTHER SETUP submenu as shown in
the figure.
Using UP/DOWN Key to adjust cursor to the
function which wants to modify.
Press ENTER key to enter Modify status and
then using UP/DOWN key to select Mode after
selected and then press Enter key to leave
modify status.
This function is present for test.
Move the cursor to the position as shown in the
figure.
Press Enter and use UP/DOWN button to
choose ON or OFF. The color bar as shown in
the figure.
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK
OTHER SETUP
CAMERA ID
-----------------------------
<ALARM>
<MOTION>
BACK