Install the camera
23
Siemens Building Technologies
Fire Safety & Security Products
08.2006
6.2.4.1 Mirror
Mirror function. Move the cursor to the position
as shown in the figure.
Press Enter and use UP/DOWN button to
choose ON or OFF.
6.2.4.2 DZOOM
Enter DZOOM submenu as shown in the figure.
Using UP/DOWN Key to adjust cursor to the
function which wants to modify.
Press ENTER key to enter Modify status and
then using UP/DOWN key to select Mode after
selected and then press Enter key to leave
modify status.
6.2.4.3 DZOOM IN OUT
This function is for setting the electronic zoom
factor. It can magnify 4 times as original. The
zoom value can be selected in 96 steps. Move
the cursor to the position as shown in the figure.
Press Enter and use UP/DOWN button to
choose the digital zoom value
6.2.4.4 DZOOM P/T SET
This function is only operational when digital
zoom is selected.
Move the cursor to the position as shown in the
figure.
Press Enter and use UP/DOWN/LEFT/RIGHT to
select visible area .
6.2.4.5 CHROMA
Setting the video chroma value.
Move the cursor to the position as shown in the
figure.
Use UP/DOWN button to choose from -7 to 8.
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK
DZOOM IN OUT
DZOOM > < ^ v P/T SET
OPTION
MIRROR OFF
<DZOOM>
CHROMA 3
COLOR BAR OFF
DNR OFF
<BACKFOCUS>
SYSTEM PAL
BACK