Installation
4.9 Installing and removing the shaft-mounted gearbox
BA 2030
Operating Instructions, 11/2017, A5E37880173A/RS-AE
45
Procedure
1.
Attach the torque arm
⑦
to the gearbox, see Torque arms with shaft-mounted gearboxes
(Page 48).
2.
Remove the corrosion protection coating using white spirit or a solvent on:
–
The shaft ends of the machine shaft
①
–
The clamping ring
③
–
The bronze bushing
②
.
3.
Check the seats or edges of the hollow shaft
⑥
and the machine shaft
①
for damage.
Please contact Technical Support if you notice any damage.
4.
Place the clamping ring
③
on the bronze bushing
②
.
5.
Position the bronze bushing
②
with the clamping ring
③
on the machine shaft
①
.
Observe the tightening torque of the tightening bolt
④
and the tolerance dimension to10.
6.
Oil lightly the locating holes in the hollow shaft
⑥
for the tapered bushing
⑨
and bronze
bushing
②
. Remove any excessive oil using a clean cloth.
7.
Push the gearbox with the installed torque arm
⑦
on the machine shaft
①
against the
clamping ring
③
.
8.
Tighten the torque arm
⑦
with the bolts
⑧
only gently because the gearbox must have
clearance for the subsequent mounting.
9.
Ensure that the thrust collar
⑨
is placed at the correct position.
If the thrust collar
⑤
is not placed at the correct position, bring the ring
⑤
into the correct
position by tightening the tightening bolts
⑩
with turned tapered bushing
⑨
.
10.Place the tapered bushing
⑨
on the machine shaft
①
.
11.Use the torque wrench to turn each of the tightening bolts
⑩
equally (not crosswise),
repeating this procedure several times. Observe the tightening torque of the tightening
bolt
⑩
.
12.Tighten the bolts
⑧
of the torque-arm fastening, see Torque arms with shaft-mounted
13.Attach the rubber cover or protection cover
⑪
included in the scope of delivery, see
Removing and installing the protection cover (Page 33).
You have installed the SIMOLOC assembly system.
Summary of Contents for BA 2030 SERIES
