Siemens AP75 Page 132 User Manual Download | Manualshive

Page: 132 / 139

background image

Guarantee certificate (IRL)

113

•

This Guarantee shall not apply to or extend to services performed by
the authorised dealer or the customer themselves (e.g. installation,
configuration, software downloads). User manuals and any software
supplied on a separate data medium shall be excluded from the
Guarantee.

•

The purchase receipt, together with the date of purchase, shall be
required as evidence for invoking the Guarantee. Claims under the
Guarantee must be submitted within two months of the Guarantee
default becoming evident.

•

Ownership of devices or components replaced by and returned to
Siemens shall vest in Siemens.

•

This Guarantee shall apply to new devices purchased in the European
Union. For Products sold in the Republic of Ireland the Guarantee is
issued by Siemens Ireland Limited, Ballymoss Road, Sandyford
Industrial Estate, Dublin 18 - The Republic of Ireland.

•

Any other claims resulting out of or in connection with the device shall
be excluded from this Guarantee. Nothing in this Guarantee shall
attempt to limit or exclude a Customers Statutory Rights, nor the
manufacturer’s liability for death or personal injury resulting from its
negligence.

•

The duration of the Guarantee shall not be extended by services
rendered under the terms of the Guarantee.

•

Insofar as no Guarantee default exists, Siemens reserves the right to
charge the customer for replacement or repair.

•

The above provisions does not imply a change in the burden of proof to
the detriment of the customer.

AP75.book Seite 113 Freitag, 18. November 2005 11:48 11

«
...
130
131
132
133
134
...
»

Summary of Contents for AP75












































































































































Reviews:

No comments

Related manuals for AP75

projectorsleeve

Brand: 3M Pages: 14

Brand: Aastra Pages: 27

Brand: TCL Pages: 34

Brand: TCL Pages: 38

Brand: TCL Pages: 26

Brand: TCL Pages: 10

OpenScape Desk Phone IP 55G

Brand: Unify Pages: 2

Brand: Archos Pages: 115

Brand: Konrow Pages: 52

Brand: Audiovox Pages: 70

Brand: AMGOO Pages: 44

Brand: Alcatel Pages: 121

Brand: HTC Pages: 204

Brand: Yarvik Pages: 515

Brand: Pantech Pages: 82

IP Pathfinder S

Brand: Fujitsu Pages: 28

IP Centrex SRS-12i

Brand: Fujitsu Pages: 69

Brand: CLC Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands