manualshive.com logo in svg

Siemens AP75, User Manual, Page: 102 / 139

Share
Download
Siemens AP75 User Manual Download Page 102

Menus

83

Power On

When you see 

Status Off

 displays on the screen, press 

K

 and choose

the 

On

 option, scroll to 

Time (H:M)

 and then enter a time you wish

the phone to be auto turned on.

Power Off

When you see 

Status Off

 displays on the screen, press 

K

 and choose

the 

On

 option, scroll to 

Time (H:M)

 and then enter a time you wish

the phone to be auto turned off.

Profiles

A profile is a group of settings that determine whether the phone will alert
you to incoming calls through a ring tone or a vibrating alert, and how
ring tones in general are used on the phone. These settings allow the
phone's operation to best suit the environment you are in.

1. Press 

J

 to scroll to the desired profile and then press 

K

 to activate

this profile. You can choose from among the following profiles:

Normal

This is the default profile. Once this profile is activated, the LCD
display's status bar will show the 

†

 icon.

Meeting

The options in this profile have been preset to suit a meeting
environment (for example, only a vibrating alert is used, with no
audible ring tone and no keypad tones). Once this profile is
activated, the LCD display's status bar will show the 

‡

 icon.

AP75.book  Seite 83  Freitag, 18. November 2005  11:48 11

Summary of Contents for AP75












































































































































Reviews:

No comments