GAMMA
instabus
Technical Product-Information
August 2017
Control Module Box AP 118
5WG1 118-4AB01
Technical Manual
AP 118, page 2 / 6
Siemens AG
Infrastructure and Cities Sector, Building Technologies
Update: http://www.siemens.com/gamma
© Siemens AG 2017
Control Products and Systems
Subject to change without further notice.
P. O. Box 10 09 53, D-93009 Regensburg
2.4.2.11/2
Technical Data
Physical Specifications
∂
housing: plastic
∂
dimensions:
Length x Width x Height (in mm): 180 x 50 x 41,1
∂
weight: approx. 100g
∂
fire load: approx. 3000 kJ
∂
mounting: with two screws
∂
one mounting location for RS / RL modules
Connections
∂
Bus line: screwless bus connection block (red-black)
0.6…0.8 mm Ø single core, strip insulation 5mm
∂
Mains power: 230 V AC ± 10 %, 50...60 Hz
terminals of RS / RL modules
Electrical Safety
∂
Degree of pollution (according to IEC 60664-1): 2
∂
Type of protection (according to EN 60529): IP 20
∂
Overvoltage category (according to IEC 60664-1): III
∂
Bus: safety extra low voltage SELV DC 24 V
Environmental specifications
∂
Climatic withstand capability: EN 50090-2-2
∂
Ambient temperature operating: - 5 ... + 45
↓
C
∂
Ambient temperature non-op.: - 25 ... + 70
↓
C
∂
relative humidity (non-condensing): 5 % bis 93 %
CE norm
∂
complies with low voltage regulations
Mounting and Connecting
General description
The Control Module Box is designed for on-surface
mounting on ceilings, walls, on the floor or any even
surface, as well as installation in installation channels or
raceways. The holes for screw fastening of the Control
Module Box are located on the ends of the box and are
accessible after opening the housing. The Control Mod-
ule Box is affixed with two screws.
Mounting
∂
Mounting of the Control Module Box:
- Distance between drill holes for screw fastening:
166 mm (see figure 2-a)
- Pull the latching clamp (A4) away from the lid (A5), lift
the lid up, swivel it up and remove it from the hinge
(A6).
- Fix the Control Module Box at the fixation points (A2)
(see figure 2-b) with screws (e.g. 4.5 x 50 mm, to be
sourced separately).
figure 2a: Mounting
