manualshive.com logo in svg

Siemens ACUSON Antares, Instructions For Use Manual

Share
Download
Siemens ACUSON Antares Instructions For Use Manual Download Page 59

 

2     S a f e t y   a n d   C a r e  

[ 1 ]   I N S T R U C T I O N S   F O R   U S E

 

2 - 37

 

To remove and clean the input/output panel air filter: 

 Caution:  

Do not scrub, stretch, or bend the filter, or apply heat to the filter, as 

doing so could damage the filter. 

1.  Power off and unplug the power cord from the power outlet. 

2.  Open the door to the input/output panel. Locate the filter tab near the 

lower door hinge. 

3.  Grasp the filter by its tab and pull it out of the slot. 

 

 

 

1 Input/output 

panel 

2  Door to input/output panel 
3  Input/output panel air filter 

 

 

Removing the air filter from the input/output panel. 

4.  Rinse the air filter with running water and allow the filter to 

completely dry. 

To hasten drying, you may gently shake the filter, or blot the filter with a 
clean, lint-free cloth. 

 Caution:

  Do not insert a wet filter as this can damage the system. 

5.  Slide the air filter back into the ultrasound system, taking care to orient 

the flat side of the filter towards the left and to place the edges of the 

filter within the filter slot. 

6.  Close the door to the input/output panel. 

 

 

1 Air 

filter 

slot 

2  Air filter, with flat 

side toward left 

 

 

Sliding the air filter into the air filter slot. 

7.  Plug the power cord into the power outlet. 

Summary of Contents for ACUSON Antares







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands