manualshive.com logo in svg

Siemens ACUSON Antares, Instructions For Use Manual

The Siemens ACUSON Antares is a cutting-edge ultrasound system that delivers exceptional imaging quality. For easy operation, download the Instructions For Use Manual from our website, where you can access the comprehensive manual for free. Empower your clinical practice with this advanced technology from Siemens. (For the desired website name, kindly provide the information.)

Share
Download
background image

[ 1 ]   I N S T R U C T I O N S   F O R   U S E

 

6 - 1

 

6  Technical Description 

Standard Features.............................................................................................. 3

 

Operator Control Panel .................................................................................. 3

 

System Operating Software .......................................................................... 3

 

Processing Power.......................................................................................... 3

 

15-inch (38 cm), High Resolution Color Monitor ............................................ 4

 

Mobility.......................................................................................................... 4

 

Transducer Technology ................................................................................. 4

 

User-Accessible Connections........................................................................ 4

 

Operating Modes .......................................................................................... 5

 

Single Modes ......................................................................................... 5

 

Mixed Modes ......................................................................................... 5

 

Formats ......................................................................................................... 5

 

General (2D) Imaging Features ...................................................................... 5

 

Pulsed Wave Doppler Features ..................................................................... 6

 

Color Doppler Features.................................................................................. 7

 

Power Doppler Features................................................................................ 7

 

M-Mode Features.......................................................................................... 8

 

Ensemble Tissue Harmonic Imaging ............................................................. 8

 

Clips............................................................................................................... 8

 

Post-Processing Features in Freeze Frame or CINE...................................... 9

 

Optional Features............................................................................................. 10

 

Mobile QuikStart for Portable Studies (Standby) ......................................... 10

 

Extend Performance Technology................................................................. 10

 

Clarify VE ..................................................................................................... 10

 

SieScape Panoramic Imaging ...................................................................... 11

 

Color SieScape Panoramic Imaging ............................................................. 11

 

SieClear Multi-View Spatial Compounding .................................................. 11

 

TEQ Technology .......................................................................................... 12

 

Spectral TEQ Ultrasound Technology (TEQ Technology for 

Pulsed Wave Doppler)................................................................................. 12

 

3-Scape Real-Time 3D Imaging.................................................................... 12

 

four

Sight 4D Imaging................................................................................... 12

 

Cadence Contrast Agent Imaging................................................................ 13

 

Summary of Contents for ACUSON Antares







































































































































































































































Reviews:

No comments

Related manuals for ACUSON Antares

WaxJet 6100 Service Reference Manual preview
6100
Brand: WaxJet Pages: 131
Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Brand: Samsung Pages: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Brand: Samsung Pages: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Brand: Samsung Pages: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Brand: Samsung Pages: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Brand: Samsung Pages: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 142
Samsung ML 1630 - B/W Laser Printer Manual Del Usuario preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 82
Samsung SL-M2875FD Installation Manual preview
SL-M2875FD
Brand: Samsung Pages: 2
Samsung M337 User Manual preview
M337
Brand: Samsung Pages: 384
Samsung Lazett Combo SCX-4216F Service Manual preview
Lazett Combo SCX-4216F
Brand: Samsung Pages: 135
Samsung CLX-6260FD Manual Del Usuario preview
CLX-6260FD
Brand: Samsung Pages: 414
Samsung SCX 6555N - MultiXpress Mono Multifunction Administrator'S Manual preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 112

Brands by name

Popular brands

Load more brands