38
Web-based Management
Gigaset WLAN Camera / english / A31008-M1026-R101-2-7619 / Web_based_management.fm / 19.04.2005
Sc
hablone 2004_12_27
ì
Enter data into the fields:
Security Features
WEP encryption
This screen is accessed by selecting
Security
:
WEP
on the
Network
screen. A sample
WEP screen is shown below.
Mode
The connection
Mode
determines the type of wireless com-
munication used by the Gigaset WLAN Camera.
u
If you have an Access Point, select
Infrastructure
.
u
Otherwise, select
Ad-hoc
.
Authentication
Type
Select the appropriate value –
Open System
or
Shared Key
,
as used on your WLAN.
Note:
In
Infrastructure
mode, both settings will normally
work, since most Access Points can use both methods.
SSID
This must match the value used by other devices on your
wireless LAN.
Note! The SSID is case sensitive.
Domain
Select your region from the drop-down list.
Channel No
u
In
Infrastructure
mode, this setting is ignored. The
Gigaset WLAN Camera will use the channel set on the
Access Point.
u
For
Ad-hoc
mode, select the channel you wish to use on
your Gigaset WLAN Camera. Other wireless stations
should use the same setting.
u
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment
with different channels to see which one is the best.
Security
This shows the current security settings:
u
Disabled
u
WEP: WEP encryption (64 or 128 bit)
u
Pre-Shared Key: WPA encryption
After selecting the security feature, click on
Apply
.
Please refer to the next chapter for configurating the security
settings.
!
To avoid unauthorised access to your wireless network, you should use
one of the following security features.
