C53000-B1100-C602-1
7XV5810 0xA00
Operating Instructions
Seite 3 von 20
1 General
Instructions
This manual includes the information required for the normal use of the products
described therein. It is intended for technically qualified personnel who has been
specially trained or has special knowledge in the fields of protection-,
instrumentation-, control-, and automatic control engineering (called automation in
the following).
The knowledge and the technically correct translation of the safety instructions and
warnings included in this manual are a prerequisite for the safe installation and
commissioning, as well as for safety during operation and maintenance, of the
product described. Only qualified personnel, as defined in the following explanation,
possess the technical knowledge required to interpret correctly and to put into action
for each individual case the safety instructions and warnings given in this document
in a general manner.
This manual is an integral part of the scope of delivery. However, it cannot take into
account every detail on all types of the described product and also every possible
case regarding installation, operation or maintenance. If further information is desired
or in case special problems should arise, which are not treated adequately in this
document, it is possible to obtain additional details from the local Siemens office or
from the addresses stated in the back of this manual.
Additionally, we point out that the content of this product documentation is not part of
or modifies any previous or existing agreement, promise, or legal relationship.
All obligations by Siemens result from the respective purchase order which also
includes the complete and exclusively valid warranty provision. The contractual
warranty regulations are neither extended nor limited by the statements in this
document.
