Siemens 7MC3040-..., Operating Manual, Page: 39 / 116

s
Operating manual PA
31
AI.V2
= 1200 (temperature 1200 °C)
7.3 General functions (configuration layer
C011
)
Green Status LED
You can assign specific functions to the LED:

LED is continuously lit to indicate 24 V operating voltage

LED indicates status of switching output 1

LED indicates status of switching output 2

LED indicates ATD function in progress
Set the function using parameter
LED.6
.
Activate Laser
If your PA pyrometer features a built-in laser, there are several ways in
which it can be activated. Configure parameter
PILO
with the particu-
lar method you have selected:

Activate using button on rear panel

Permanently off

Edge-triggered: based on signal input (0 -> 24V transition)
Use parameter
PIL.T
to configure the laser ON-time between 1 (mini-
mum) and 15 minutes (maximum).

NOTE !
Do not attempt to operate the laser continuously. The built-in laser
is not designed for continuous use. When the user-defined laser
auto-shutoff time is reached (maximum programmable duration =
15 minutes) the laser will automatically switch off. When the am-
bient temperature exceeds 55°C the laser will automatically deac-
tivate.
Video camera settings
Pyrometer models with an integrated video camera feature the following
operating modes.
Target Brightness Control (TBC) settings