Siemens 6GF3326-0HT01, Operating Instructions Manual

Page: 40 / 44

Appendix
A.3 Certificates & approvals
SIMATIC MV326
40
Operating Instructions, 08/2021, C79000-G8976-C644-02
A.3.1 FCC information
Siemens SIMATIC MV326 (optical handheld reader)
FCC ID: HSW2832 (CR2702_01)
Siemens SIMATIC MV326 (charging station)
FCC ID: X8WBT840 (CRA-A271)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Important Note
To comply with FCC RF exposure compliance requirements, this device must not be co-
located or operate in conjunction with any other antenna or transmitter.
Caution
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.