Siemens 6GF3326-0HT01, Operating Instructions Manual

Page: 36 / 44

Appendix
A.2 "Specify character length to be read" function
SIMATIC MV326
36
Operating Instructions, 08/2021, C79000-G8976-C644-02
A.2 "Specify character length to be read" function
Description of the function
With the help of this function, you can specify the code character length to be read by the
SIMATIC MV326 optical handheld reader. When you enable this function, the optical
handheld reader will only read codes that have exactly the character length you have
specified.
This function is particularly useful when multiple codes with different character lengths are
printed on the product that is to be scanned.
Enabling the function
Follow these steps to enable the function:
1.
Scan the following code to enable the function:
2. Scan the "QuickConnectCode" on the charging station.
3. Scan the required character length code with which you specify which codes with which
character length are to be read.
The table below contains the character length codes.