Documentation guide
Technology module TM ECC 2xPWM ST (6FE1242-6TM10-0BB1)
10
Manual, 04/2018, A5E42681298B-AA
●
Backup/restore of data from/to a backup file for CPUs and HMI devices
●
Downloading service data from a CPU
●
Reading the diagnostics buffer of a CPU
●
Performing a CPU memory reset
●
Resetting devices to factory settings
●
Downloading a firmware update to a device
You can find the SIMATIC Automation Tool on the Internet
https://support.industry.siemens.com/cs/ww/en/view/98161300
PRONETA
With SIEMENS PRONETA (PROFINET network analysis), you analyze the PROFINET
network during commissioning. PRONETA features two core functions:
●
The topology overview independently scans PROFINET network and all connected
components.
●
The IO check is a fast test of the wiring and the module configuration of a system.
You can find SIEMENS PRONETA on the Internet
https://support.industry.siemens.com/cs/ww/en/view/67460624
SINETPLAN
SINETPLAN, the Siemens Network Planner, supports you in planning automation systems
and networks based on PROFINET. The tool facilitates professional and predictive
dimensioning of your PROFINET installation as early as in the planning stage. In addition,
SINETPLAN supports you during network optimization and helps you to exploit network
resources optimally and to plan reserves. This helps to prevent problems in commissioning
or failures during productive operation even in advance of a planned operation. This
increases the availability of the production plant and helps improve operational safety.
The advantages at a glance
●
Network optimization thanks to port-specific calculation of the network load
●
Increased production availability thanks to online scan and verification of existing systems
●
Transparency before commissioning through importing and simulation of existing STEP 7
projects
●
Efficiency through securing existing investments in the long term and optimal exploitation
of resources
You can find SINETPLAN on the Internet (
