Description, device design, dimension drawing
2.1 Device description
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
25
2.1.3
SITOP UPS1100
The SITOP UPS1100 battery modules consist of a battery holder with two maintenance-free,
sealed lead-gel or LiFePO4 batteries with terminals for the connecting cables to the SITOP
UPS1600 uninterruptible power supply. The SITOP UPS1100 includes a printed-circuit board
for monitoring the battery functions and the communication with the SITOP UPS1600. A
green LED indicates that there is a communication connection to the SITOP UPS1600. The
LED flashes when the batteries are being replaced or for faults and alarms.
Note
The 5 Ah SITOP UPS1100 battery module with LiFePO4 batteries can only be used in
conjunction with SITOP UPS1600 from software version V2.1 and higher.
Up to 6 SITOP UPS1100 of the same type can be connected in parallel with a SITOP UPS1600.
When replacing a battery, see Chapter Battery replacement SITOP UPS1100 (Page 226).
①
DC power terminal X1
②
Signal terminal X2
③
Fuses F1/F2 (F2 only for 7 Ah and 12 Ah)
④
Signaling (LED)
⑤
Mounting rail holder (not for the 7 Ah and 12 Ah versions)
⑥
Natural convection
⑦
Clearance above
Figure 2-4
SITOP UPS1100 design (example 6EP4133-0GB00-0AY0)
Summary of Contents for 6EP4131-0GB00-0AY0
Page 6: ...Overview SITOP UPS1600 BAT1600 UPS1100 6 Equipment Manual 07 2021 A5E37775406 11 76 ...
Page 12: ...Table of contents SITOP UPS1600 BAT1600 UPS1100 12 Equipment Manual 07 2021 A5E37775406 11 76 ...
Page 262: ...Environment SITOP UPS1600 BAT1600 UPS1100 262 Equipment Manual 07 2021 A5E37775406 11 76 ...