Siemens 300Series User Manual Download Page 73

Page: 73 / 170

Making Calls

3-15

3.
Makin

Calls

➩

To end setup, press the Program key. The
Program status light turns off, and
STORED is displayed if you have a display
telephone.

➩

On your faceplate, use a pencil to label
each DSS key you changed with the name
or extension of the person it dials.

To clear a DSS
key on a display
telephone

➩

Press the Program key. The Program status
light turns on, and PRESS FEATURE
KEY OR DIAL CODE is displayed.

➩

Press the DSS (D-) key you want to clear.
DIRECT STATION SELECT is displayed,
followed by the stored extension.

➩

Before NEW NUMBER? is displayed,
press the Clear key. DELETED is
displayed.

➩

If you want to clear another D-key, repeat
the previous two steps.

➩

To end setup, press the Program key. The
Program status light turns off.

➩

On your faceplate, erase the label next to
each D- key you have cleared.

Note:

You cannot clear a DSS key on a non-display telephone or any
telephone without a Clear key, though you can set it up to dial
a different extension.

To dial a DSS
extension

➩

Press the DSS (D-) key for that extension.
The other party will hear a triple beep.

Summary of Contents for 300Series











































































































































































Search results

Summary of Contents for 300Series

Reviews:

Related manuals for 300Series

Brands by name

Popular brands

Siemens 300Series, User Manual

Search results

Summary of Contents for 300Series

Reviews:

Related manuals for 300Series

Brands by name

Popular brands