Siemens 300Series User Manual Download Page 137

Page: 137 / 170

Managerial Features

7-9

7.
Mana

ial Featu

res

To change your
station hunt
destination

➩

Remove your phone from the hunt group,
as described on page 7–10.

➩

Verify that both the member who is your
current destination and the one who will
become your new destination have also
removed their phones from the group.

➩

Get a dial tone.

➩

Dial # * 9 0.

You will hear the confirmation tone,
followed by the dial tone. If you have a
display phone, STATION HUNT is
displayed.

➩

Dial the primary extension of the member
to whom you want to advance calls.

You will hear the confirmation tone. If you
have a display phone, STATION HUNT
and your destination are displayed.

➩

Hang up.

➩

Rejoin your hunt group, as described on
page 7–10.

Note:

You must remove yourself from the hunt group before you can
change your station hunt destination.

To clear your sta-
tion hunt
destination

➩

Remove your phone from the hunt group,
as described in the next section.

➩

Verify that the member who is your station
hunt destination has also removed their
phone from the group.

➩

Get a dial tone.

Summary of Contents for 300Series











































































































































































Search results

Summary of Contents for 300Series

Reviews:

Related manuals for 300Series

Brands by name

Popular brands

Siemens 300Series, User Manual

Search results

Summary of Contents for 300Series

Reviews:

Related manuals for 300Series

Brands by name

Popular brands