Motor components and options
4.2 Options
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
85
A holding brake may also be required if:
●
The bearing friction does not compensate or exceed the cogging torques and unexpected
movements result.
●
Unexpected movements of the drive can lead to damage (e.g. a motor with a large mass
can also generate a high level of kinetic energy).
●
Drives with a weight load must be shut down and de-energized in any position.
To prevent movements when the drive is switched on or off, the holding brake response
must be synchronized with the drive.
During commissioning, refer to the documentation for the drive system being used.
4.2
Options
4.2.1
Round sealing ring (O-ring)
Summary of Contents for 1FW6092-2PC15-6AB3
Page 1: ...1FW6 High Speed built in torque motors ...
Page 2: ......
Page 299: ......
Page 300: ......