Function checks
3 - 3
Siemens AG
SPR8-125.034.02
Page 3 of 6
POLYMOBIL Plus
Medical Solutions
Rev. 02
03.05
CS PS 24
Checking the counterbalance system
3
•
Unlock the support arm (1/Fig. 2) and loosen the knob (2/Fig. 2). The support arm
without
attached accessories should move through the entire range easily and should
stop in any position.
Readjusting the counterbalance system with accessories
attached
3
•
If the support arm with accessories attached does not stop in any desired position,
readjust the spring tension for the counterbalance.
•
Remove the cover (3/Fig. 2) from the stand.
•
Release the supplemental brake on the support arm (2/Fig. 2).
•
Move the support arm into the horizontal position.
•
Tighten the screw (4/Fig. 3) using a 17-mm open-ended wrench. Adjust the spring
tension in such a way, that there is a balance when the support arm is in the horizontal
position, i.e. that equal force is required to lift and lower the tube assembly.
4
1
2
3
Fig. 2
Fig. 3
