5-10
ROLMphone 120/240/400 Series User Guide
Park
Park lets you move a call to an extension and hold it there, without
ringing that extension. You or another party can then retrieve the call
from the extension as needed.
Park is used in connection with the Park access code (* 6), which you
can dial directly or by pressing a repdial key set up for it.
To park a call to
another extension
➩
Press the Transfer (TRANSFR) key.
You will hear the confirmation tone,
followed by the dial tone.
➩
Dial * 6.
➩
Dial the extension where you want to park
the call.
You will hear the confirmation tone. If you
have a display phone, PARKED will be
displayed.
➩
Hang up.
Note:
If the extension is busy, the call will be queued to that
extension. The party at the extension will hear an alerting tone.
If the extension is busy and in Privacy mode, the call cannot
be parked to it.
If the call cannot be parked to that extension, you will hear an
error tone. If you have a display phone, NOT POSSIBLE will
be displayed. To retrieve the call, press the Connect key.
Summary of Contents for 120 Series
