Preparation for use and operation
!
Please take note of the "Important notes" at the beginning of this Operating
Manual.
Unpacking and checking the delivery
It is recommended not to throw away the original packing material! It may be
required for reshipment at some later date.
Unpack all the individual parts.
Check the delivery for damage incurred during transport.
Check whether the delivery agrees with the details in the delivery note.
Check whether all the necessary details have been entered on the guarantee
card or on the first page of the guarantee coupon booklet.
Should you discover that the equipment has been damaged during transport or that
the delivery does not correspond to the delivery note, notify your local sales office
immediately.
If you have received drives or modules with your PC, mount them before
i
installing the PC. The technical manual for the PC will tell you how to do
this.
Preparing your PC for use
When preparing your PC for use, you should carry out the following steps in the
order given. If not otherwise specified, these steps are described in this section.
1 Set up the PC in the selected location.
2 Connect the devices to the system unit.
3 Check the rated voltage and connect the system unit to the power voltage.
4 Switch on the PC and follow the instructions on the screen.
A26361-K381-Z102-2-7619
11
Preparation for use and operation
Setting up the PC
Setting up the PC
!
When installing your PC, give consideration to the recommendations about
an ergonomic video workstation in the "Safety and ergonomics" manual.
We recommend that you place your equipment on a surface with good anti-
slip qualities.
In view of the multitude of different finishes and varnishes used on furniture,
it is possible that the PC's rubber feet will mark the surface it stands on.
Provide at least 200 mm of clearance on the left and behind the ventilator
area of the system unit to ensure adequate ventilation. Do not cover the
ventilation areas of the monitor and the fan.
Do not expose the PC to extreme environmental conditions (see the chapter
"Technical data"). Protect it from dust, humidity and heat.
The color monitor must not be exposed to strong magnetic fields
12
A26361-K381-Z102-2-7619
