Error messages
This chapter contains error messages generated by the system board.
Diskette drive A error
Diskette drive B error
Check the entry for the diskette drive in the Main menu of the
BIOS Setup
.
Check the connections to the diskette drive.
Extended RAM Failed at offset: nnnn
Failing Bits: nnnn
System RAM Failed at offset: nnnn
Restart the PC. If the message is still displayed, please contact your sales
office or customer service.
Fixed Disk 0 Failure
Fixed Disk 1 Failure
Fixed Disk Controller Failure
Check the entries for the hard disk drive in the Main menu of the
BIOS Setup
.
Check the hard disk drive's connections and jumpers.
Incorrect Drive A - run Setup
Incorrect Drive B - run Setup
Correct the entry for the diskette drive in the Main menu of the
BIOS Setup
.
Invalid NVRAM media type
Restart the PC. If the message is still displayed, please contact your sales
office or customer service.
Keyboard controller error
Connect another keyboard. If the message is still displayed,please contact
your sales office or customer service.
Keyboard error
Check that the keyboard is connected properly.
Keyboard error nn
Release the key on the keyboard (nn is the hexadecimal code for the key).
Monitor type does not match CMOS
Correct the entry for the monitor type in the Main menu of the
BIOS Setup
.
A26361-D858-Z120-6-7619
57
Error messages
Operating system not found
Check the entries for the hard disk drive and the floppy disk drive in the Main
menu of the
BIOS Setup
.
Parity Check 1
Parity Check 2
Restart the PC. If the message is still displayed, please contact your sales
office or customer service.
Previous boot incomplete - Default configuration used
By pressing function key
F2
you can check and correct the settings in
BIOS
Setup
. By pressing function key
F1
the PC starts with incomplete system
configuration. If the message is still displayed, please contact your sales
office or customer service.
Real time clock failure
Call the
BIOS Setup
and enter the correct time in the Main menu. If the
message is still displayed, please contact your sales office or customer
service.
System battery is dead
Replace the lithium battery on the system module and redo the settings in
the BIOS Setup.
System Cache Error - Cache disabled
Restart the PC. If the message is still displayed, please contact your sales
office or customer service.
System CMOS checksum bad
Call the
BIOS Setup
and correct the previously made entries or set the default
entries.
System timer error
Restart the PC. If the message is still displayed, please contact your sales
office or customer service.
58
A26361-D858-Z120-6-7619