Siemens Nixdorf D818, Technical Manual

Page: 25 / 26

Index
Interrupt Jumper
IRQ10 17 J13H1-D 22
IRQ11 17 J13H3-F 23
IRQ9 17 J13H3-G 23
Invoking setup menu 23 location 21
IRQ password 21
Active State 20 settings 21
State 20 setup menu 21
IRQ10 17
IRQ11 17
K
IRQ9 17 Key repeat function 11, 12
ISA Linear Frame Buffer 15 Keyboard 11
port 3
J
J1F1 3, 28
L
J1F3 3, 28 Linear Frame Buffer 15
J1G1 3, 28 Lithium battery 5
J3A1 3, 27 Load operating system 13
J4F1 3 Local Bus 1
J4G1 3 Location of jumpers 21
J4H1 3 Loudspeaker, connector 3
J4H2 3 Lowercase level 13
J7A1 21
J8J1 3
M
J8J2 3 Main memory 24
J10A1 3, 29 enlarging 24
J11H1 3, 27 sockets 3
J12H1 21 Manual 18
J12H1-B 22 Memory
J12H1-C 22 configuration main memory 24
J13H1 21 internal cache memory 2
J13H1-D 22 main memory 24
J13H3 21 second level cache memory 2
J13H3-F 23 setup memory 2
J13H3-G 23 video memory 2
Jumper 7 Memory module
CMOS RAM 21 installing 25
Flash BIOS 21 removing 25
J7A1 21 Message Press <F1>... 12
J12H1-B 22 Missing operating system" 10
J12H1-C 22 Modules with ESDs 5
Monitor interface 3
A26361-D818-Z120-1-7619
39
Index
Monochrome screen controller Pin assignment
setting 23 J10A1 29
Mouse interface 3 J11H1 27
J1F1 28
N J1F3 28
Network Password 14 J1G1 28
checking 14 J3A1 27
No copying Ports 2
of memory area 16 Power supply, connector 3, 27
to Shadow Memory 15 Press <F1> Message Display 12
to Shadow RAM 15, 16 Primary monitor controller 21
Normal 20 Processor 3
Not Installed 11 Pentium 2
Notes on software 6 speed 2
Num Lock 13 Programming Option 18
Programs with time loops 6
O Prompt for Password 14
On-Board
Floppy Drive 18 R
IDE Drive 19 Real-time clock chip 3
Operating System missing 10 Recovering BIOS 22
Option Removing memory module 25
ADVANCED CMOS SETUP 11 Resetting CMOS-RAM 22
PERIPHERAL MANAGEMENT Resolution 4
SETUP 18
STANDARD CMOS SETUP 9
S
OverDrive processor Socket 2 SCO-UNIX, Notes 6
Screen
P memory 2
Parallel resolution 4
interface 3 SCSI hard disk drive 10
Port Address 20 Second level cache memory 2
Port Mode setting 20 Second Serial Port Address 19
Password Ser 1 3
jumper 21 Ser 2 3
Prompt 14 Serial interface 3
PCI slots 2 Serial Port setting 19
Pentium processor 2 Set Linear Frame Buffer to 15
Performance 14
PERIPHERAL MANAGEMENT
SETUP 8, 18
40
A26361-D818-Z120-1-7619