Settings and add-on modules
IDE Multiple Sector Mode
This field enables you to specify how many sectors are transferred during
each hard disk access.
The actual number of transferred sectors per access depends on the
installed IDE hard disk drive. The entry
64 S/B
automatically sets the optimum
values for the installed IDE hard disk drive.
Possible entries:
1, 2, 4, 8, 16, 32
or
64 S/B
(sectors/access operation)
Default entry:
64 S/B
Enhanced ISA Timing
This field enables you to set the timing of the ISA bus.
Possible entries:
Enabled
The timing of the ISA bus is 10 MHz.
Disabled
The timing of the ISA bus is 8 MHz.
Default entry:
Disabled
ISA IRQ9
ISA IRQ10
ISA IRQ11
You must enter
Used
in the Interrupt field if one of the three interrupts is used
by an installed ISA board.
Possible entries:
Used
The interrupt is used by an ISA board.
Free
The interrupt is available for automatic PCI configuration.
Default entry:
Free
A26361-D818-Z120-1-7619
17
Settings and add-on modules
Settings using the PERIPHERAL MANAGEMENT SETUP option
Programming Option
This field enables you to specify whether the peripherals (controlled by the
I/O controller) are configured automatically or manually.
Possible entries:
Auto
Peripheral devices are detected and configured automatically. The fields
that follow are not applicable.
Manual
The peripheral devices must be set manually using the fields that follow.
Default entry:
Auto
On-Board Floppy Drive
Any entry in this field is not applicable if the
Programming Option
field contains
the entry
Auto
.
This field allows you to enable or disable the floppy drive controller on the
system board.
Possible entries:
Enabled
The floppy drive controller is enabled.
Disabled
The floppy drive controller is disabled.
Default entry:
Enabled
18
A26361-D818-Z120-1-7619
