SIELCO srl
- Via Toscana, 57/59 - 20090 BUCCINASCO (Mi) - ITALY - tel. 02 - 45713300 - www.sielco.org
EXC/RTX19 - USER & MAINTENANCE MANUAL - rev.1.5 - 05/16
Page 26
ENTER PASSWORD
....
Dir Power: 4.0 W
Refl Power: 0.0 W
SETUP
OPERATION
Field #20: Initial Password
This field requests to input a valid password code. When the input is confirmed by "enter", the
word will be compared with the memorised password table and, if recognised, the corresponding
security level will be allowed. If the password is incorrect or the input is terminated by an "escape",
the password will be signalised as invalid and the security level allowed will be that actually in
memory, i.e. 0 (no permission at all), 1 or 2.
The security level is as factory pre-set to "off" for the 1st and the 2nd level: in this case, which
is the most common, there is no need to input any password to freely navigate in the menu tree and
to change most parameters. This field will not be displayed if not expressly required by setup field
#32 (see later).
When the password is recognised as valid and the corresponding level is displayed, press on
the escape key to turn on the first menu field #01.
Field #01: Operation and setup menus
As the title suggests, this field permits to chose to operation (default choice) or setup menu
branches. Pressing the "enter", the highlighted one will be chosen.
Field #02: Direct & Reflected Power
This field shows the direct and reflected power actually delivered. Not all the transmitter
models and especially those on the SHF
1300-2600 MHz
range shows the reflected power.