SIELCO srl
- Via Toscana, 57/59 - 20090 BUCCINASCO (Mi) - ITALY - tel. 02 - 45713300 - www.sielco.org
EXC/RTX19 - USER & MAINTENANCE MANUAL - rev.1.5 - 05/16
Page 25
STEREO ENCODER: YES
TX19 SW rev. 1.XX
SIELCO -ITALY
EXC19 - rev. 1.XX
NORTH-WEST RADIO
EXC19 - rev. 1.XX
Start menu
The start menu field is the unnumbered one on the top of the menu tree. It is shown only at the
initialisation step, when the apparatus is turned on from mains or software reset and all the leds
and the display will be turned on and off for testing purpose. It will show the kind of the apparatus,
the software release and the presence of some particular internal options.
In this case, immediately after the inizialisation, the transmitter will briefly show the presence
(YES) or not (NO) of the internal Stereo Encoder, avoiding to open the apparatus to visually
inspect. From this field, if the security allows, it will pass directly to the next menu field.
Field #00: Default Message
This field shows again the apparatus model, the software release and the manufacturer's name.
This is the field to which we always return back if we will press the escape key once or twice.
If the 3rd level authorisation is granted (see later "password setup and input"), by previously
input "enter", it is possible to change the Manufacture's name to any user defined alphanumeric 20
characters string, as in the following example:
If the security authorisation is granted at least for the first level, rotating the jog will give access
to the subsequent menu field #01. Otherwise a valid password will be requested (see #20).