SIELCO srl
- Via Toscana, 57/59 - 20090 BUCCINASCO (Mi) - ITALY - tel. 02 - 45713300 - www.sielco.org
EXC/RTX19 - USER & MAINTENANCE MANUAL - rev.1.5 - 05/16
Page 23
MENU AND COMMANDS DESCRIPTION
The menu tree is composed by two separate parallel branches. Navigation through the menu fields
is straightforward and natural, with the jog knob. Rotating the knob counterclockwise or clockwise will
scroll up and down the menu fields in both the measure and setup branch. A quick push on the knob
will act as "enter" or confirm while a longer push will be interpreted as "escape" , aborting the operation.
Choosing between the measure and setup branch is immediately proposed after the display of
the default field, which reports the equipment model and the firmware revision. At any time,
repeatedly "escaping" will return back to the default field. It is not possible to pass from the measure
branch directly to the setup without passing through this field.
In the setup menu, the "enter" key changes from scrolling to program mode. Program mode is
signalised by highlighting and flashing of the variable words. When in program mode, rotating the
knob will change the characters or the options in the local field. Pushing "enter" will confirm the
input data while "escaping" will abort it.
A local input time-out will automatically escape the command mode resetting input data if this
is not confirmed in 60 seconds after the last variation. In the same manner, 3 minutes later of the
last input in the setup menu, a local time-out will reset the menu and enter into the modulation control
field.
Navigation on the menu tree is subjected to the security authorisation by the password
management system. In order to navigate in the measure/control branch, only the first level of
authorisation is required. If the security option is enabled, at least the first password must be input.
Factory default preset state is "disabled".
In the same manner, to access to the setup branch, the second level of authorisation is required
or the input of the second level password. Again, factory default preset state is "disabled". Only
some hardware or factory presets require the third level authorisation. This is also the case of the
edition of the Organisation name on the first row of the default menu field.
Few minutes of experiments will enable most users to gain confidence with control keys and
menu and to be able to access all main features of the transmitter, without any previous training.
The hierarchical trees of the menus are shown in a table before detailing each submenu field
of both the transmitter and the receiver, with a small number near the left side of each field for easy
reference. In the following pages we will examine each menu field and option, with reference to
these numbers.