Pic. 1: Instructions (Pic. Shows Version 28)
Lever
Lever Absorption
Clamping Spot
Clamping
2.
SAFETY INSTRUCTIONS
Pay attention to the following instructions to avoid malfunction material
damages and physical damages
2.1. INTENDED USE
2.2. COMMON SAFETY INSTRUCTIONS
The intended use of the unit is the clamping of work pieces with a clamping force of max 25.000 N inside
an external absorption. The unit itself is unable to absorb any radial forces.
• The unit is used in a dry internal area with normal room temperature.
• The unit is not suitable for lifting and bearing loads.
• The unit is
not
approved for EX protected areas.
• The unit is not approved for the use inside machine tools.
• The unit is designed for central power transmission of the piston rod.
Pressure holding time 30 minutes.
• Protection of work pieces (position/overhead clamping) against dropping out is not allowed inside
a fixture or machine
→
Keep packing material away from children. Danger of choking!
→
Read this assembly and operating instructions carefully prior to initial operation.
→
Secure the proper installation of the unit in the destined application prior to initial operation or
maintenance work.
6
