background image

Disposal of the hydraulic and oil

Packaging material should be conveyed to an environment friendly recycling.

7. DISPOSAL

      DANGER

Pre stressed spring!

Injuries caused by the pre stressed spring unit.

→ 

   Open the unit only if appropriate safety measures are applied to the  

construction elements.

→ 

   Retract the piston rod to reduce oil pressure and spring tension.

Pre stressed springs

F = 400 N

Pic. 9: Disassembling 

→ 

   Wear safety clothing and protection equipment while working with hydraulic devices (safety gloves, 

eye protection).

→ 

   Regard the accident prevention regulations while disassemble the unit.

→ 

   The unit consists of different materials which can be homogeneous separated:

•  Aluminium
•  Steel, galvanized
•  Steel, untreated
•  Elastomer
•  Plastics
•  Oil

      NOTICE

→ 

   When opening the unit, oil is leaking. Please collect the oil in a suitable container.

→ 

  Recycle used hydraulic oil environment friendly !

→ 

   National regulations about environment protection and work safety are regulating the 

disposal of oil and the handling of used oil. Pay attention to those regulations! 

20

Summary of Contents for 16002766



























Reviews: