Siegenia KFV AS3500, Assembly Instructions Manual

Page: 4 / 28

Introduction
4 04.2016
KFV
1. Introduction
1.1 Target group of this documentation
This documentation is intended for use by specialists only. All work described in this doc-
ument is to be performed by experienced professionals with training and practice in the
assembly as well as commissioning and maintenance of multi-point locks. Safe and proper
assembly of these locks hinges is not possible without expert knowledge.
1.2 Intended use
1.2.1 Installation location
• The multi-point lock is suitable for installation in single-sash and double-sash doors in
permanent buildings.
• The multi-point lock may only be installed in doors that have been fitted in a technically
sound manner.
• The door design must permit use of the multi-point lock.
1.2.2 Locking part and hardware
• The use of any additional devices to keep the door closed (with the exception of a door
closer) is not permitted. If a door closer is installed, it must not impede operation of the
door by children, the elderly or infirm.
• Repair of the multi-point lock is not permissible. If the multi-point lock is damaged, it must
be replaced by KFV or repaired by a service agent authorised by KFV.
• Only KFV frame parts with Q adjustment may be used.
1.2.3 Transport
• Always transport the multi-point lock in a vertical position, whether uninstalled or installed
in the door leaf.
• Do not place the multi-point lock heavily on the ground when it is unpackaged, as this can
damage the lock.
• Do not carry the door by the lever handle or hardware when transporting it.
• Opening/closing/locking: It must be possible to open and close the door easily.
A protruding latch and /or deadbolt must not impede the opening of the door.
17 See note on page 17 for transport when installed in an element.
• The locking elements must always engage freely in the lock striker of the frame parts.
1.3 Improper use
• Do not use for escape doors.
• The multi-point lock is not designed to accommodate changes to its shape or seal which
arise as a result of differences in temperature or changes to the building.
• The multi-point lock must not be used in doors for wet rooms or rooms in which the air
contains aggressive or corrosive components.
• Foreign objects and/or materials which impede or prevent proper use must not be placed
within the opening range, the locking system or the striker plates.
• The multi-point lock must not be interfered with and/or modified.
• Locking elements must not be misused to hold the door open.
• Movable or adjustable locking pieces (e.g. deadbolt, latch) must not be painted over.