Original operating instructions
AEROVITAL
06.2018
9
Step 7:
Cable routing
For fixed electrical connection (a)
1. Lift the ventilation unit and push the pipe, fixed to the unit,
a little bit into the wall opening.
2. Pull the cable through the opening on the rear side of the
ventilation unit.
For connection to a socket (b)
1. Route the connection cable on the left or right side in the
cable duct.
Note:
The cable must be neatly routed in the cable duct to
prevent it from being pushed through or squeezed during the
installation.
a
b
Step 8:
Screwing the ventilation unit onto the wall
1. Lift the ventilation unit and push the pipe fixed to the unit
through the wall opening.
2. Press the ventilation unit firmly against the wall and fix
with four screws.
3. Seal joints between the ventilation unit and wall with
permanently elastic sealing compound.
