59
Story call
Call signalling that can be displayed on your own device or a freely
selectable user or a freely selectable group. If the potential-free contact at
the input terminal of the terminal is closed, then the storey call is indicated
for approx. 5 seconds. Here you can configure the device/user/group for
which the storey call is to be indicated. Before you can assign a group to the
storey call, a group must be configured.
Signal status
Signal that is triggered when the potential-free contact at the input ter-
minal of the terminal is closed (e.g. mail notification system). To assign this
function to a button, you need to configure the switching input to “Signal
status” and then save it. Then you can assign this switching input to one
of the buttons on your devices in the “Button configuration > Status point
display” area.
Every user which has the right to display this input signal can
have the input signal displayed at any optional device which is capable of
visualizing status displays.
If other parameters have to be configured for a particular button assign-
ment (e.g. with one switching point), the
Set
button becomes active.
After clicking on
Set
, a dialogue is displayed in which the relevant required
data can be selected or entered.
