General parame‐
ters
1
TMS88B-PKC360
TMM88B-PKC090
Temperature coeffi‐
cient (zero point)
Typ. ±0.01°/K
Sampling rate
80 Hz
Limit frequency
Typ. 20 Hz, 2nd order (no digital filter) / 0.1 ... 25 Hz, 8th order (with
digital filter)
Operating tempera‐
ture
-40 °C to +80 °C
Properties
Current interface
Freely configurable output in the range 4...20 mA (factory setting:
4...20 mA)
Freely configurable angle range 0...360° / ±90°
Functions
Teach input for zero-point setting when installed
Limitation of final value, counting direction, and axis assignment of out‐
puts can be configured
Digital filter (critically damped (default) or Butterworth low pass, 8th order)
Electrical parameters
Supply voltage
16 ... 35 VDC
Current consump‐
tion
35 mA @ 24 V + I
loop
Outputs (short-cir‐
cuit protected)
Inductive load less than 50 mH, load 500 Ω (standard)
Permissible load dependent on input voltage (
)
Mechanical parameters
Connection
5-pin M12 sensor plug connector (male connector)
Enclosure rating
IP65/67
Dimensions /
Weight
Plastic housing: 66 mm x 90 mm x 36 mm / approx. 200 g
1
All specified angular accuracies apply after a run-in time of 10 min at 25 °C, limit frequency 0.3 Hz,
absolute calibration accuracy (at 25 °C): ±0.05°
Figure 9: TMS88B measuring axis (large plastic housing)
TECHNICAL DATA
4
8019053/1EF6/2021-12-13 | SICK
O P E R A T I N G I N S T R U C T I O N S | TMS/TMM88, TMS/TMM55
15
Subject to change without notice