10
Decommissioning
10.1
Removing the module
•
Remove the plug-in terminals along with the wiring and the end pieces.
•
Push the module down at the back (1). With the module still pushed down, move it
in the direction of the arrow to remove it from the mounting rail (2).
Figure 4: Removing the module, example
10.2
Disposal
CAUTION
Risk of injury due to hot device surface.
The surface of the device can become hot during operation.
■
Before commencing disassembly, switch off the device and allow it to cool down
as necessary.
If a device can no longer be used, dispose of it in an environmentally friendly manner in
accordance with the applicable country-specific waste disposal regulations. Do not dis‐
pose of the product along with household waste.
NOTICE
Danger to the environment due to improper disposal of the device.
Disposing of devices improperly may cause damage to the environment.
Therefore, observe the following information:
■
Always observe the valid regulations on environmental protection.
■
Separate the recyclable materials by type and place them in recycling containers.
10
DECOMMISSIONING
26
O P E R A T I N G I N S T R U C T I O N S | SIM1000 FXA
8023299//2019-03-13 | SICK
Subject to change without notice
