Figure 1: Mounting the device, illustration only
1
Mounting rail
2
Grounding clip
3
Direction of engagement with the mounting rail
1.
Make sure that the voltage supply is switched off.
2.
Hook the device onto the DIN mounting rail.
3.
The grounding clip must sit flush against the mounting rail so that it is secure and
can conduct electricity effectively.
4.
Snap the module into place on the mounting rail by applying a slight pressure in
the direction of the arrow.
5.
Mount the end pieces on the left and right side of the module.
MOUNTING
5
8023299//2019-03-13 | SICK
O P E R A T I N G I N S T R U C T I O N S | SIM1000 FXA
15
Subject to change without notice
