![background image](http://html1.mh-extra.com/html/sick/rfu6-series/rfu6-series_technical-information_1264582030.webp)
Technical information
RFU6xx FB for
GX Works 2 (PNDP)
Page 30
6.2 Write tag
First, it is necessary to select the transponder which should be used.
If the bit "Mode” =
TRUE, then the system will communicate with the specified transponder, the UII of which is
known in advance (in this case [hex]: "0123 4567 89AB CDEF").
Figure 24: Specification of the transponder UII
Subsequently, it is necessary to define what content is to be written to the tag and where it
should be stored.