Mounting the sensor
1
2
Figure 2: Mounting the sensor in the C-slot
1.
Insert the sensor into the C-slot
1
.
2.
Push the sensor into the required position.
Take into account the measuring object length and the blind zones of the sensor.
3.
Push the sensor into the C-slot and tighten the setscrews slightly.
4.
Use the tape measure to check the position of the sensor and correct it if neces‐
sary.
5.
Push the sensor into the C-slot and tighten both setscrews between 0.2 Nm and
0.4 Nm
2
.
5
MOUNTING
12
O P E R A T I N G I N S T R U C T I O N S | MPS-C
8019721.1FIH/2022-06-01 | SICK
Subject to change without notice
