8
Maintenance
8.1
Maintenance plan
During operation, the device works maintenance-free.
NOTE
No maintenance is required to ensure compliance with the laser class.
NOTE
No maintenance is required to ensure compliance with the LED risk group.
Depending on the assignment location, the following preventive maintenance tasks
may be required for the device at regular intervals:
Table 13: Maintenance plan
Maintenance work
Interval
To be carried out
by
Check device and connecting cables
for damage at regular intervals.
Depends on ambient conditions and
climate.
Specialist
Clean housing and viewing window.
Depends on ambient conditions and
climate.
Specialist
Check the screw connections and
plug connectors.
Depends on the place of use, ambi‐
ent conditions or operating require‐
ments. Recommended: At least every
6 months.
Specialist
Check that all unused connections
are sealed with protective caps.
Depends on ambient conditions and
climate. Recommended: At least
every 6 months.
Specialist
8.2
Cleaning
Cleaning includes the viewing window and the housing of the device.
DANGER
Risk of injury due to hot device surface.
The surface of the device can become hot during operation.
•
Before performing work on the device (e.g. mounting, cleaning, disassembly),
switch off the device and allow it to cool down.
•
Ensure good dissipation of excess heat from the device to the surroundings.
NOTICE
Equipment damage due to improper cleaning.
Improper cleaning may result in equipment damage.
■
Only use recommended cleaning agents and tools.
■
Never use sharp objects for cleaning.
b
The device must be cleaned regularly from the outside to guarantee heat dissipa‐
tion and therefore operation. Clean using a dry towel or an industrial vacuum
cleaner. Do not use cleaning agents.
MAINTENANCE
8
8026257//2020-12 | SICK
O P E R A T I N G I N S T R U C T I O N S | InspectorP61x
45
Subject to change without notice
